We are the agents for Teco Westinghouse, and Baldor. We stock a wide range of drives including open loop drives, sensorless vector, full vector, IP66 and many more. Soft Starters also available. |
|
Teco |
|
The E2 is our basic drive, from our experience they are a very reliable drive trusted by local OEMs exporting overseas. These are available as single or 3 phase in, also in IP65 with power ratings up to 2.2kW read more... |
|
CV7300 |
|
The CV7300 is a feature packed drive. Its sensor less vector algorithm gives a better speed range taking care of motor slip. They have a built in PLC making it usefull as a complete controller for simple automation applications. Good for extending the life of mechanical brakes as the drive can do the braking and be programmed to apply the mechanical brake once motor has decelerated to a given speed, other applications include roll forms and presses read more... |
|
Baldor |
|
VS1ST |
|
Feature rich Volts/Hertz variable speed drives designed for easy installation, set-up and operation at an economical price. Ideal replacement for fixed speed starters and for OEM applications. Built-in local control allows drive to operate out-of-the-box. Motor ratings from 0.37kW to 11kW. Built-in ModBus-RTU with RJ45 port for easy communication with other devices read more... |
|
H2 |
|
Can operate as open loop speed control (Inverter Volts per Hertz) or Encoderless Vector. Inverter Volts per Hertz provides easy setup and operation right out of the box. Used for a variety of applications that require adjustable speed operation and good speed regulation over a limited operating speed range including pumps, fans, and general machinery applications. Best choice for applications where multiple motors are operated simultaneously from one motor control. Also available in IP65 read more... |
|
KBAC |
|
The KBAC-24D Adjustable Frequency Drive is a variable speed control in a NEMA-4X/IP-65 washdown and watertight enclosure with front panel mounted control switches and speed potentiometer. Several models are available to provide variable speed control for ac 3 Phase Motors of 0.18kW to 3.7kW. The sine wave coded Pulse Width Modulated (PWM) output operates at a frequency of 16kHz which provides high motor torque, high efficiency, and low noise. Due to its user friendly design, the KBAC is easy to install and operate. Tailoring to specific applications is accomplished via selectable jumpers and trimpot adjustments, which eliminate the computer-like programming required on other drives. However, for most applications no adjustments are necessary read more... |
|
KBMA |
|
A low cost adjustable frequency (inverter) drive designed to provide variable speed control of standard 3 phase ac induction motors. Ready to install and operate in an IP65 Enclosure. Provides all of the features of the KBVF drive. Fully featured drives with user friendly design. Easy to install and operate. Simple jumper and trimpot adjustments eliminate the computer-like programming required on many drives. However, for most applications no adjustments are necessary read more... |
|
KBVF |
|
The KBVF chassis mount, adjustable frequency (inverter) drives are designed to provide variable speed control of standard 3 phase ac induction motors. The KBVF is a fully featured drive, and due to the user friendly design, is easy to install and operate. Simple trimpot adjustments eliminate the computer-like programming required on many drives. However, for most applications no adjustments are necessary. Adjustable linear acceleration and deceleration are provided, making the drive suitable for soft start applications. The output voltage is sinewave coded PWM operating at 16kHz, which provides high motor torque, high efficiency and low noise read more... |
|
Line Regenerative AC Inverter Drives & Flux Vector Drives |
|
Baldor Line Regenerative Drives return the power generated during motor braking back into the incoming line read more... |
|
